Changelog

What changed in each release, newest first.

0.46.0

Improved

  • Narrow tables cut long headings instead of abbreviating them

    When the Pods list is short of room, its Containers heading now reads "Conta…" rather than "Ctrs", and every shortened heading keeps at least five letters. Hover a heading for its full name.

  • A link to a resource that is gone now offers a way on

    The not-found page opens its list first ("Pods in staging"), and for a Pod that has since been replaced it offers its Deployment, its ReplicaSet and the Pod that took its place.

  • The update dialog says when an update has been verified

    Once a new version is downloaded and its checks pass, the dialog shows "Update verified" with the download's SHA-256, so you can compare it with the release. While it downloads, the bar now shows what it is doing on the left and how far it has got on the right.

0.45.0

Fixed

  • The cluster picker always shows the part of the name that tells your clusters apart

    After switching clusters and then narrowing the window, the picker could keep a name cut for the old width and clip it to the shared middle (…k8s-…). It now re-cuts on every resize, and when there is only room for three or four characters it shows just the distinguishing part (csp, main) rather than an ellipsis and a fragment. Hover the picker for the whole name.

  • Port forwards name the cluster the way the cluster picker does

    When the Cluster column is too narrow, it keeps the end of the name that tells your clusters apart (…cluster-csp) instead of cutting it off, and it shows the cluster's name rather than its id.

  • The strip under the header no longer touches the page

    The "Nothing could be indexed" and demo cluster notices keep the same gap above the menu and the page as the header does.

  • The page has its gap under the header back

    There is ground showing between the header and the page again, as before the pickers were levelled.

0.44.0

Improved

  • Settings: the links under the sections are a short list, one per line

    Debug, Stats for nerds, Licences and Terms each get their own line. Docs and Changelog are no longer listed there; the changelog is still in the update dialog.

0.43.0

Improved

  • A tidier header: the cluster picker, search and namespace picker line up

    The three are now the same height with the same rounded corners, shaped to sit neatly in the window's own corner, and the header takes a little less room above the page.

Fixed

  • Latest Chromium security fixes

  • The update download bar uses your accent colour

    It was drawn in the system's green on macOS.

0.42.0

Improved

  • Search sits right after the cluster picker in the header

    The namespace scope now comes after the search field, so the bar reads the way the question is asked: in this cluster, find this, in these namespaces.

  • Indexing a slow cluster no longer blocks the window

    Opening a cluster for the first time used to put a dialog over the page while it was indexed. It is now a small card in the corner, and it only appears when the indexing has taken more than five seconds; it still names each kind as it lands, and still offers to cancel or to choose which resources are indexed.

  • Timestamps in the log pane switch on and off without reloading the log

    The lines stay where they are, and so do your place in the log, any gaps you opened and a running search. The choice is remembered for every log, and a downloaded file shows timestamps when the pane does. In the structured view, lines in a format with no time of its own now show the time the kubelet received them.

  • Sternpost reopens your windows where you left them, and keeps your preferences between launches

    Quit with several windows open and the next launch brings every one of them back: each on its page, at its size and place, with its namespace scope and focus mode. Settings → App → On launch switches it to one window on the home page as if new instead, and Table sorts, a setting of its own, chooses whether each table keeps its sort from one launch to the next or starts in its natural order. The other choices you make in the app, like the Windows settings, also stopped resetting every time Sternpost started. The "Not found" page names what's missing the way the app does: No Job "x" in production.

    Docs

0.41.0

Improved

  • See and switch off every kubeconfig file Sternpost can read

    Settings → Privacy & permissions lists each file in a table: the main one your shell points at, each you added with Add kubeconfig, and each your clusters use, with the date and a switch. Turning a file off removes the clusters added from it, after a confirm that names them.

    Docs
  • Sternpost reopens where you left off

    The next launch opens on the page you were last on, in focus mode if that's how you left it. If the resource or cluster has gone since, you get a "Not found" page instead of a page of failed reads. Focus mode also stays on when you open Manage clusters from the cluster picker or reload the window.

Fixed

  • The page sits evenly in the window with the menu hidden or in focus mode

    Its left edge was almost touching the window's, so its rounded corners no longer followed the window's. The header also lost the extra space above its controls, so the search field sits as close to the top of the window as to its right edge.

0.40.0

Improved

  • Reach the terminal's settings from the terminal

    The gear at the right of the Remote terminal toolbar opens Settings → Terminal.

    Docs
  • Settings → Search lists the watched kinds one per line

    Each group's kinds are stacked under its name, with the measured size beside each one, lined up so the figures are easy to compare.

0.39.0

New

  • Scroll up in a pod's log to read further back

    The lines before the ones a log opened with load in as you reach the top, without moving the line you're reading, back to the start of what the node keeps. New lines are counted at the bottom meanwhile; Jump to latest takes you back to the live end.

    Docs

Improved

  • Focus mode keeps the header in one row at the top of the window

    The focus button, activity indicator, cluster and namespace pickers and the search field now sit on one line where the header always is, so the page gets the room that used to go to space around the search. In the normal header the focus button now comes just before the cluster picker.

Fixed

  • The Metrics dialog says why a save was refused

    Save used to do nothing visible when the source was refused. And Detect's services, or a Test result, from one cluster no longer show up when you open Metrics for another.

  • Settings shows where a search landed when reduced motion is on

    With "Reduce motion" turned on in your system, picking a setting from the palette's Search settings now tints the row you land on instead of showing nothing.

  • Job notification pages no longer redraw from scratch as they open

    A Job notification held its Download complete log dialog inside a paragraph, which the page's first draw couldn't keep, so the whole page was thrown away and drawn again a moment after it appeared. A notification with a captured log now opens once, without the flash.

  • After an out-of-memory restart, Sternpost comes back with its window

    It no longer comes back tray-only when it had been started at login, no longer opens the link that started it a second time, and on macOS its window comes to the front. A burst of memory failures is now one crash report, so the earlier reports you had not sent yet are kept, and the unsaved edits of a window that closed are offered at once if the restart is called off.

  • Windows and Linux name their own file manager, not Finder

    After an export, and for the memory log in Settings → App, the button now says Show in Explorer on Windows and Show in folder on Linux. The Export dialog also turns down, before Save, a file name Windows can't hold, so a saved file opens on any computer.

  • A shared link can't open a terminal without asking

    With "Links may open a terminal" off, a link to a remote terminal spelled with capitals or encoded letters used to connect the shell without asking first. Every spelling now asks, and the dialog that asks where to open a link says Remote terminal for a link to the terminal window.

  • The terminal's Pod picker names the pod the shell is in

    On a Deployment's Remote terminal tab, the Pod picker kept reading "no pods" after the shell had connected; it now shows the pod as soon as the list is in.

    Docs
  • Leaving Settings stops a watch-cost measurement

    Leaving Settings → Search, or switching cluster, while "Measure on this cluster" runs now stops it, and the cluster is not asked for more. On a cluster that cannot be reached, the measurement gives up after the first failure instead of trying every kind in turn.

0.38.0

New

  • Open a remote terminal in its own window

    The terminal toolbar has Open in window, as the logs do: a new shell on the same pod, container and shell, in a window of its own. The shell in the panel keeps running.

    Docs

Improved

  • More buttons say what they do before you click

    Docs and Feedback in the status bar wear the small corner arrow that means "opens outside Sternpost". Export buttons and a notification's "Download complete log" lead with the download tray. The console's Copy all says "Copied" for a moment. Buttons that are working — Check now, Import…, Install now, Measure — wear the live dot while they wait. The detail panel's Full screen button points its arrows back in while the panel fills the window.

    Docs
  • Checkboxes match the rest of the controls, and watched kinds are switches

    Checkboxes now have rounded corners and a rounded keyboard focus ring, like every other control. In Settings → Search, each watched kind is a switch like the rest of Settings, with its name lined up beside it, and the focus ring and pointer highlight go round the switch and its name together. The small "on" / "off" under every switch is quieter, so it helps without drawing the eye. The bar under a chosen option, in segmented choices and toolbar toggles, is now straight at the ends instead of curling up the rounded corner, the lines between options are straight, and choosing an option no longer makes it wider and pushes its neighbours.

  • Forms, the console and search read like the rest of the app

    Every dialog's fields now have their label above them, in the same small grey caption, from Add a port forward and the cluster dialogs to Scale. The console's buttons and its × are the app's usual size, the switches in Settings are easier to see when off and react to the pointer, and the × on a palette command is easier to hit. In search results the line after a name is grey, so the names stand out. Keyboard keys are drawn at the size of the text around them, bold text is no heavier than a heading, and the Clusters page shows each API server address in the code font like the kubeconfig path beside it.

  • Panels, dialogs and Settings match the rest of the app

    The Subscriptions panel and the YAML panel now close with the same × as every page and Settings, and their buttons and titles are the size of the app's other buttons and panel titles. In confirmation dialogs and the Export dialog, the cluster's name is written at the same size as the rest. In Settings, the shortcut fields are the height of every other field, and the links at the foot of the menu are easier to hit; so are the status bar's icons and version numbers, the console's on/off switch and the examples in the search help.

  • Links, errors, status dots and fields are easier to read

    In the light scheme, links and the focus ring are a deeper orange, red words (Delete, ImagePullBackOff, error text) and the green and amber status marks are darker, so all of them stand out clearly on every background, including hovered rows. In the dark scheme, red words are a little lighter. Text fields, dropdowns and the search fields now have a visible edge, and the chosen option in a switch (Settings choices, Follow in the logs) is marked with an underline and bolder text, not only a tint.

  • Buttons, switches and fields line up at one size across the app

    Segmented switches (the history arrows, the cluster picker, Settings choices, the log view switches) are now exactly as tall as the buttons beside them, with the same text size. The icon buttons in the top bar are all the same square, page header buttons and the Scale dialog use the standard size, and the close button looks the same on every page.

  • A resource's kind and namespace, above its title, open the list

    On any resource page, the line over the title ("CronJob • acceptance") now links: the kind to its list, the namespace to that list scoped to it.

    Docs
  • Improvements across the whole interface

    Controls look and behave the same from one page to the next, the things that matter stand out first, and buttons say what they do. The Status column names what is wrong, the way kubectl does, beside a coloured dot; Delete is red wherever it appears; and the top bar groups its buttons by what they are for.

  • Every control shows a clear, whole focus outline and answers the pointer the same way

    When you move through the app with Tab, the outline now goes all the way round whatever has focus, with rounded corners that match it: tabs, the cluster picker, the history arrows, Settings choices, the log view switches, table links and row buttons, and the status bar included. In the light scheme the outline is a deeper orange, so it is easy to see on every surface. Segmented switches now highlight under the pointer like ordinary buttons, and the status bar's icons light up when you point at them.

  • Icons are one size per place, and drawn alike everywhere

    The log and terminal toolbars' icons are a step smaller, so they no longer outweigh their words; the icons beside a page's title, the close button and the header's buttons match each other; and every dropdown, sort and section arrow is the same small chevron, the menu's groups included. The structured log's inspect button and its hidden-match mark, the palette's Port forwards row and the Console's cluster colour are drawn like the rest instead of being symbols from the system font. The arrow after a link that leaves the app, and the gear in the search field, are dimmed with a readable colour instead of being faded out.

    Docs
  • The Containers section's Table and Timeline switch has room on its row

    On a pod's page the section rows are a little taller, so the switch on the Containers row is full size instead of squeezed.

  • Small controls are easier to hit

    Every item in the menu, the Match case and Regex toggles in the log search, the cluster name in the status bar, the names in a resource's Related list and the bar you drag to resize the logs panel now have a click area at least 24 pixels tall and wide, so they are easier to hit with a mouse or a trackpad. The menu is a pixel taller per row; everything else looks as it did.

  • Text in every part of the app follows one set of sizes, and quiet text is easier to read

    Small text used to come in half a dozen sizes a fraction apart; it now takes one of a few steps everywhere, so labels, counts and notes look the same on every page. Table headings are smaller and quieter than the rows under them, labels beside values are styled alike in every panel and dialog, and Settings uses the same title and heading sizes as the rest of the app. Placeholders in search and filter fields, the status bar, the small print under Settings and the ⓘ before docs links were too faint in the light scheme; they are now dimmed with a readable colour instead of being faded out.

  • Watched kinds in Settings are grouped into separate panels

    In Settings → Search, each group of watched kinds (Cluster, Workloads, Config and the rest) has its own panel with its name as a title, and there is more room between the switches and between the panels. Long names like HorizontalPodAutoscalers now fit whole instead of ending in an ellipsis, and the small "on" / "off" under each switch draws less of the eye.

Fixed

  • Log pages no longer redraw from scratch as they open

    The log toolbar held its Download dialog inside a paragraph, which the page's first draw couldn't keep, so the whole page was thrown away and drawn again a moment after it appeared. A pod's or a workload's log now opens once, without the flash.

0.37.0

New

  • Open a copy of the window you're in

    Press ⌘⇧N (Ctrl+Shift+N on Windows and Linux) for a new window on the same page, with the same namespace scope and at the same size.

    Docs
  • A thin bar along the top of the window while a page loads

    Open a page that takes a moment — a list on a cluster that is slow to answer — and a hairline in the accent colour sweeps along the window's top edge until the page is up, then slips off. Pages that arrive at once show nothing.

  • See what each watched kind costs in memory before ticking it

    Settings → Search can now measure the cluster you're on: how many objects of each kind it has and roughly how much memory keeping them live takes, with a total for the kinds you have ticked. Press "Measure on this cluster"; kinds already watched are counted from what Sternpost holds, the rest from a small sample.

    Docs

Improved

  • A pod's container table reads more easily

    Runtime now comes before Restarts. A container that is still running shows its time so far in grey, with a trailing "…" ("26m…") instead of "running 26m".

  • The init and sidecar tags on a pod's timeline line up

    On the Containers section's Timeline view, the "init" and "sc" tags now sit at the right edge of the name column, one under the other, as they do in the logs panel's container list, instead of trailing each name.

  • Every icon explained, and the share button moved

    The docs have a new Iconography page: every mark in the app, what it means and where it sits. On a resource page and a list, "Copy a link to this page" now comes before the favourites ribbon.

    Docs
  • Dismiss every waiting error report at once

    When Sternpost has noticed more than one crash or error, the notice now offers Dismiss all, so you no longer have to close them one by one.

  • The log toolbar says what each button does before you click

    Its switches — Follow, Wrap, Timestamps, Previous instance — sit together in a well and stay pressed; Clear and Reconnect stand apart; and the buttons that take the log somewhere else say so: Download full log is an arrow into a tray, and Open in Console wears a small arrow on its corner, which becomes a dot while the file is being written.

    Docs
  • Unsaved edits come back after an out-of-memory restart

    When Sternpost has to restart after running out of memory, it no longer asks whether to discard the YAML or log format you were editing. It keeps the edit, and after the restart a card offers to open it where you left it. If the resource changed on the cluster in the meantime, the editor says so and Review Changes shows the difference from the current version. If it was deleted or its cluster can't be reached, you can copy your text instead.

  • Every dropdown looks like the cluster picker

    The pickers in the log toolbar, the terminal bar, the list filter and the dialogs open the same list as the cluster and namespace pickers in the header, and all of them end in the same chevron.

Fixed

  • Sternpost asks to restart when it runs out of memory

    It used to stay open but stop reaching your clusters. It now says it needs to restart and comes back connected. Followed CronJobs and watched Jobs no longer reconnect every second after a brief network drop, such as waking from sleep. Sternpost also no longer jumps in front of the app you switched to while it was starting, and Settings → App has a Log memory use switch, off by default, for tracking down problems like this one.

0.36.0

Improved

  • Icons look the same everywhere

    Close buttons, arrows, disclosure and sort marks, the notifications envelope, warnings, the header controls and a container's done, failed, running and waiting marks are now drawn icons in one style. Before, they were text symbols that changed size and weight from one place to the next, and on some systems turned into emoji. On Windows and Linux, commands in the search show Ctrl instead of the Mac's ⌘.

0.35.0

Improved

  • Check for updates from What's new

    The dialog that opens from the version number in the status bar now starts with when Sternpost last looked for a new version and a Check now button. When a new version is out, Review… shows it in the same dialog.

    Docs

Fixed

  • A link to a container the pod doesn't have opens the log on one it does

    A shared link or a typed address naming a container that isn't in the pod left the log panel trying that name and showing nothing; it now opens on the pod's usual container. The Remote terminal's Restart button stays off until there's a shell to restart, for example while a shared link's "Connect a shell?" question is unanswered.

0.34.0

New

  • Add clusters from another kubeconfig file

    Add kubeconfig… in Add cluster access lets Sternpost read a second file, such as a kind cluster's or one you were sent, and lists its contexts next to your own. Take it back in Settings → Privacy & permissions.

    Docs
  • Copy a link to the logs or the terminal you are looking at

    The Logs and Remote terminal toolbars have a share button: the link opens the page on that tab, in the container you have selected. The share button by the page's title now always links to the page itself, whichever tab is showing.

    Docs
  • Share a link to one setting

    Hover a heading or a setting's name in Settings and a # and a copy mark appear; click the name and a link to that very row is on your clipboard. It opens Settings on that row in a coworker's Sternpost, the way Copy link does for any page. The dialog that asks where a shared link opens now offers the same choice as the Settings row, confirms or cancels, and links to that row.

Improved

  • A cluster without a colour no longer looks pink on the Clusters page

    The colour control in its row shows a small rainbow until you pick one, so it reads as "no colour yet" rather than as a colour the cluster has.

  • Dialogs are easier to read and their buttons are where you expect them

    The Metrics and Add a port forward dialogs line their fields up in labelled rows, with the explanation under the field it is about, and every line of a dialog has room around it. Test, Save and Forward now sit beside Cancel at the bottom, with the probe's answer next to them.

  • The namespace, pod and cluster pickers match the rest of the app

    Their lists have rounded corners, the same rows and the same focus ring, and the namespace and pod lists tick in the app's colour. An empty Scope or Filter now says All instead of 0 selected, and a ticked All shows the count, as in All (14). Typing a name on a closed picker opens the list on it without changing your scope, and the ⌘-click (Ctrl-click on Windows and Linux) tip now sits at the bottom of the list.

Fixed

  • A shared link always asks before it opens

    With "Open shared links in" set to Ask every time, a link that arrived while the window was loading could go unasked, and a second link replaced the one being asked about. Each link now gets its own "Open a shared link" dialog, in turn, and the dialog says how many more are waiting.

  • Discard changes takes you where you clicked

    With an unsaved edit in the configuration panel, clicking a link in the menu or on the page asked whether to discard it, but Discard changes only closed the panel and you had to click the link again. It now drops the edit and follows the link.

0.33.0

New

  • Choose where a shared link opens

    A sternpost:// link now asks which window to open in — this one or a new one — and names the page it goes to first. Tick "Always do this" to stop being asked, or pick the last window, a new window or ask every time under Settings → App.

  • Save your port-forward rules to a file and load them back

    Export… and Import… at the foot of the Port forwards page. Import matches each rule to a cluster by its id, then by its name, skips what is already there, and starts the rules that were listening when they were exported. Use it before removing a cluster, or to carry your rules to another machine.

  • Settings → Storage shows crash dumps and log exports, and clears them

    Two new rows next to the demo cluster's: the crash records and the minidumps the OS wrote after a crash, with their size and the oldest's date, and the files "Open in Console" streams logs into. Each has a Clear; log exports a viewer still has open are kept.

  • See how much space your subscriptions take, and clear them all

    Settings → Storage shows what the Job notifications, their captured logs and the CronJob follows take on disk, with a Clear all button that asks before deleting them.

Improved

  • Quitting Console stops the log it was following

    "Open in Console" now watches the viewer it opened the file with. When Console quits — ⌘ Cmd + Q, a crash, a kill — the stream into the file stops and the toolbar's toggle comes up, instead of staying pressed over a file nobody reads. The toggle also follows a stream that ends on its own, in every window.

  • Crash dumps and log exports no longer pile up

    A minidump is a snapshot of Sternpost's memory and can contain credentials, so dumps older than two weeks are deleted when Sternpost starts and only the five newest are kept; the crash record and its report stay. Log exports now live in Sternpost's own data folder rather than the shared temporary one, and each file is deleted once its stream is stopped and Console has closed it — all of them when Sternpost quits.

  • Shared links find the cluster even when your account can't read its identity

    A link now also names the cluster by its endpoint, so a coworker whose account can't read kube-system still lands on the right cluster. For anything else, Edit cluster has a Link id field: set the same value on every machine and links meet there.

  • Pin and share sit together in a page's header

    The favourite ribbon and the copy-link mark are now a matched pair at the right of a page's title, drawn the same way, on resource pages and lists alike. The page's actions — Forward port, edit, Delete on a resource; the namespace filter and Delete on a list — are kept apart from them.

  • Links that leave Sternpost say so, and Settings point at the docs

    A link that opens in your browser ends with ⇱; a link to the manual starts with ⓘ. Each Settings section, and the dialogs that behave like one, now link to the docs page that explains them, and the status bar has a ⓘ that opens the docs from anywhere.

    Docs
  • Latest Electron

    Sternpost now runs on Electron 45 (Chromium 156), two releases on from Electron 43: Chromium's security fixes from both, and a supported Electron for the coming year. macOS 13 or later is now required.

  • Clusters that sign in through a plugin no longer run it for every request

    On EKS, GKE and AKS, Sternpost used to call aws, gke-gcloud-auth-plugin or kubelogin for every list, read and log — up to a dozen times when a detail page opened. It now signs in once per cluster and keeps the token until it expires, so pages open faster and the plugin's own prompts stop repeating. Editing the kubeconfig file, or removing the cluster, starts afresh.

  • Usage bars fill the row, in one quiet colour

    The CPU and memory columns draw each pod's share of its limit as a bar the full height of the row, on a track that shows the whole, in a single neutral grey: a pod at 98% of its memory limit may be exactly where it should be, so nothing turns red. The exact percentage is on hover. Table cells also gained a small gap, so neighbouring bars stay apart.

  • The Containers section's Table and Timeline switch is a pair of icons

    Hover either for what the view shows; the words are still read out by a screen reader.

Fixed

  • A crash or a full disk no longer empties your clusters, forwards or notifications

    Sternpost saved its clusters, port forwards, notifications, follows, log views and settings by writing over the file in place, so a crash, a power cut or a disk that filled up halfway through could leave an empty file — and the next save kept it empty. Every one of those files is now written beside the old one and swapped in whole.

  • Removing a cluster stops its port forwards

    Its rules go with it, and the Remove dialog says how many. Before, a forward kept serving localhost for a cluster you had just removed, and came back as a failing rule after the next launch. To keep the rules, export them first from the Port forwards page.

  • A shared link doesn't open a shell in a pod unless you let it

    A sternpost:// link to a pod's Terminal tab used to connect a shell the moment the page opened. Now the page opens on the Terminal tab and asks before connecting. To let links connect straight away, tick "Links may open a terminal" under Settings → App, or "Also let links open a terminal" in the dialog that asks where a link opens.

  • The Events section says why the cluster refused it

    When your account may not list events, the Events section on a detail page showed the whole response, headers included. It now shows the cluster's own reason, the way the lists already do.

  • A new window's history list starts with its own pages

    The list behind the header's ‹ › (⌥ Option-click, right-click or hold) in a window opened from another one no longer begins with the pages of the window it was opened from, which it could not go to.

  • A very chatty pod no longer makes Sternpost's memory grow while you read its log

    When a pod wrote faster than the window could draw, the lines piled up inside Sternpost until it ran out of memory. The log now waits for the window to catch up instead, for a single pod and for a workload's merged log alike. A single enormous line (a payload printed with no line break) is cut at 1 MB, with a note at the end saying how much was left out, instead of being held whole.

  • A workload's log keeps going when a pod comes back under the same name

    A StatefulSet's merged log went quiet after a rollout: the new web-0 has the old one's name, and the log kept waiting on the pod that was gone. The same for a DaemonSet pod deleted and recreated. The new pod's lines now follow on in the same lane, and a muted pod stays muted across the rollout.

    Docs
  • The manifest editor asks before you leave with unsaved changes

    Every confirmation now names the cluster the way the picker does, in its colour, instead of by its id.

  • A finished Job's sidecar no longer reads as an error

    When a Job's app container completes, Kubernetes stops its sidecars; the pod page called that sidecar "Error / exit 137" and the log opened on it instead of the app container. It now shows as "Stopped · with the pod", muted, and the log opens on the container that did the work. On Windows and Linux a sternpost:// link clicked while Sternpost was still starting is no longer lost. The Events section of a resource page stays usable after folding it while it loads.

  • The search shortcut and shared links work right after you agree to the terms

    On a first run, or after the terms changed, the OS-wide search shortcut stayed dead, a link that had opened Sternpost went nowhere and Settings → Keyboard shortcuts showed the shortcut as not registered until you quit and opened Sternpost again.

  • The connectivity dot in the cluster picker stays live after a switch

    It used to freeze on whatever it showed at the first cluster switch, no longer following the network or the cluster going unreachable.

  • Search settings finds every setting, and small wording fixes

    "Pages in the history list" now answers to the palette's Search settings; the Logs note names the { } button the View moved to, the kubeconfig ask says "Allow reading it" in both places, and Decline on the terms screen says Sternpost is quitting.

  • The terms come back if their text changed, not only their version number

    Agreeing is now tied to the words you read: the same version number over a changed text asks you again. Nobody who has already agreed is asked again by this change.

  • Lists catch up as soon as your Mac wakes from sleep

    After waking, every list, the search and the open detail page reconnect to the cluster at once, instead of showing rows that could be up to ten minutes old until the dead connection was noticed. Sternpost also keeps its place in each cluster's stream of changes now, so reconnecting after a quiet spell no longer re-downloads whole lists.

0.32.0

New

  • See a pod's containers, in the order they start

    A pod's page now has a Containers section: every init container, sidecar and app container in start order, with its state, restarts, last exit, how long it ran and its image. Switch to the Timeline view to see each run on one time axis, back-off and all. Logs and Shell on a row, or the container's name, open the panel below on that container. In the log viewer, a multi-container pod's containers are now a list beside the lines instead of a dropdown in the toolbar: click one to read its log, fold the list away when you want the width. The toolbar's controls — Previous, Follow, Timestamps, Wrap, Match case, Regex, Clear, Reconnect, Download, Open in window — are now icons; hover one for its full name. How many lines a log opens with is now set once, under Settings → Logs, instead of in every toolbar. How the lines are read — View, the format, the minimum level — sits behind a { } button at the start of the toolbar, in a small popover. The remote terminal has the same container list beside it, a shell picker marked with the prompt, and Restart as the same mark as the log's Reconnect. Searching a busy log no longer makes the page stutter: matches are highlighted in the lines on screen and painted as you scroll, instead of across every held line at once.

  • Share a link to any resource page that opens in a coworker's Sternpost

    "Copy link" on a resource page gives a sternpost:// link that names the cluster itself, not what you called it. Opened on another machine, Sternpost goes to the same page on that person's own registration of the cluster, however it is named there, and nothing in the link grants access they don't already have or says where the cluster is.

  • See the pages you've been to behind the ‹ › arrows

    Hold, right-click or ⌥ Option-click either arrow in the header for the list of pages this window has been through, most recent first, with the current one marked — pick any to jump straight there. Arrow keys move through it, Enter goes. How many pages the list keeps is under Settings → App.

  • A pod's log opens on the container that matters

    Opening a pod's log no longer starts on its first init container. It opens on the one you would look at first: a container that is crashing or can't pull its image, else the init step that is running right now, else the app container, else the last one that ran. Picking a container from the Containers section still wins. When the log is being read as JSON with a format, the braces button in the toolbar wears a small check, and its tooltip names the format.

  • Follow a log in Console

    In the logs panel, "Open in Console" streams the pod's (or the workload's) log into a file and opens it with your system's log viewer — Console on macOS, which keeps showing new lines as they arrive, with its own search. Click again to stop; the file is cleaned up when Sternpost next starts.

  • Find a setting from the palette

    Type "settings" in the header search and pick Search settings, then the name of what you're after — "dark", "fuzzy", "tail" — and Enter takes you to that row, lit up. On the Settings page, ⌘ Cmd + F / Ctrl+F opens the palette with Search settings already in place.

    Docs

Fixed

  • A running Job on a CronJob's page no longer looks like a link

    In the Jobs table, "Running" was drawn in the same orange as the Job names beside it. The status is now a small coloured dot beside the word, as in the cluster picker, and the word stays in the text colour.

  • Sternpost no longer jumps in front of the app you are working in

    Opening Sternpost from the menu bar icon, a second launch or a notification while another app is active brings the window up behind that app instead of over it. A pick in the search palette still lands in front, since you asked for it there.

0.31.0

Improved

  • A state card at the top of every detail page

    The status badge now sits in a card with the object's age and the image it runs — the first one, with "Show more" for a pod with sidecars. On a Deployment, CronJob or any workload the age carries a second number: when its latest release, run or pod was made, "260d • 2d".

  • A Node's page lists the Deployments running on it, and a Deployment's page lists its Nodes

    The related resources on a Node now follow each pod up to its Deployment, StatefulSet, DaemonSet or CronJob, the way a Deployment's already reach its Ingresses through their Services. A workload's page shows the Nodes its pods run on the same way.

Fixed

  • Latest Chromium security fixes

  • The search results open under the header search field on list pages

    With a resource list open, ⌘ Cmd + K's results list dropped down from the page's filter bar instead of the header field it belongs to.

0.30.0

New

  • See a resource's events on its page

    Every resource page ends with an Events section, folded like Labels and Annotations: open it for what the cluster has said about this object, newest first, with Warnings marked. It is read when you open it, and a refresh button reads it again.

Improved

  • Make a log format without leaving the log

    "New format from this line" now opens the format editor right over the log, in the window you are in, instead of a new Settings window. The editor has a Name field, and the format's id follows the name, so two formats no longer end up both called "New format". Save, and the log is drawn with the new format at once, pinned until you pick Auto again. The Format select lists your own formats under "Yours".

    Docs
  • Port forwards that stopped working are flagged at the top of the page, with a Fix button

    When a forward can't listen — most often because another app took its port while Sternpost was closed — the Port forwards page now says so above the table and offers the fix in one click, without hunting for the row's edit button off the edge of a small window.

  • Search fields are easier to spot and say their shortcut first

    The header search and the filter above every resource list now start with a magnifying glass, and the list filter is the same size as the header search instead of a small box lost over a wide table. Every search field's placeholder now opens with its keyboard shortcut, so a narrow field still shows how to reach it.

0.29.0

New

  • Choose light or dark in Settings › Appearance

    Light, Dark, or System to follow the OS as before. The whole app changes at once — every window, the manifest editor, the terminal and the window's own title bar — and the choice is remembered for the next launch.

  • Try a fake cluster demo when you have none to hand (experimental)

    Add cluster → "Try a fake cluster demo" (the home page offers it too) downloads a small Kubernetes control plane and runs it on your Mac, filled with a product team's worth of workloads to click around in; Remove on the Clusters page puts it all away. Experimental, and macOS on Apple silicon only for now; nothing in its pods really runs, so logs, terminals, port forwards and usage columns stay empty.

    Docs
  • Jump to a pod's logs or a shell from the palette

    Type "logs" or "terminal" in the header search, pick a pod or workload, and its page opens with the logs panel or the remote terminal filling the window.

    Docs
  • See what a resource is connected to, beside its details

    A Deployment's page now lists the Services in front of it, the Ingresses routing to them, the HPA scaling it and the ConfigMaps and Secrets it mounts; a Service lists its pods and the Ingresses naming it; a Node lists what runs on it. Each name is a link. On a narrow window the list sits below the details instead.

Improved

  • Resource pages say what kind of resource you are looking at

    The line above the name now reads "Service • production" instead of just the namespace. Before, the kind was only visible by hovering the owner trail.

  • Error pages that say what happened and what to do

    When a page can't load, Sternpost now says which it is — nothing at this address, a page that couldn't load, or the app's own server not answering — and offers the way out: try again, go home, reload or relaunch. An error that strikes outside a page — in a click, a stream, a timer — shows a small notice in the corner instead of going only to the console. Both offer Copy details and Report on GitHub, which opens an issue with the details already in it for you to read before posting; the account name in paths, credentials and e-mail addresses are replaced first. A crash of a window or of the app is noticed too, and offered the same way at the next start; Debug › Errors lists them.

Fixed

  • The page title no longer bounces or drifts while the page scrolls

    The title bar on a resource page used to ride along with the content when a scroll overshot the end, and a menu opened from one of its buttons could slide off the button. The bar now stays put and only the page below it scrolls.

  • The window no longer vanishes a few seconds after launch

    On macOS the window and the dock icon disappeared shortly after Sternpost started, leaving only the menu bar icon.

  • Owner trail kinds no longer sit on the header buttons in a narrow window

    Hovering a resource page's owner trail shows the kind under each name. When the window was narrow enough for the buttons to wrap under the trail, those kinds landed on the buttons.

  • Detail-page tables no longer float their heading over the page header

    A pod or revision list on a resource's page kept a sticky heading it never needed, and the layer it sat on showed through the page's own header when the page scrolled. Only the resource list, which scrolls inside its own box, keeps a sticky heading now.

0.28.0

New

  • The status bar shows the cluster's Kubernetes version

    Next to the cluster name, bottom left: the release the API server runs. Click it for About this cluster — build, platform, Go version, node count, context and API server.

  • Go back and forward from the keyboard

    ⌘← and ⌘→ (Ctrl+← and Ctrl+→ on Windows and Linux) step through the pages you've visited, the same as the ‹ › buttons in the header. While you're typing in a field the keys keep moving the caret. Change them, like every other shortcut, in Settings → Keyboard shortcuts, which now takes arrow keys too.

    Docs
  • Open the palette from anywhere with ⌃⌥ Option⌘ Space

    With or without a Sternpost window open, ⌃⌥ Option⌘ Space (Ctrl+Alt+Space on Windows and Linux) brings up the search and commands over whatever you're doing, and a pick opens it in Sternpost. The cluster and the namespace scope sit right above the field. Change the chord, or turn it off, in Settings → Keyboard shortcuts.

    Docs

0.27.0

New

  • Sternpost asks before it reads your kubeconfig

    The first time you open Add cluster, it asks to read your kubeconfig and reads nothing until you say yes; paste one instead and the file is never opened. Settings → Privacy & permissions lists every choice you've made: the terms, this, version info, agents.

    Docs
  • See what controls each Pod, ReplicaSet and Job in the list

    A new Controlled by column names the ReplicaSet, StatefulSet, DaemonSet, Job, Deployment or CronJob behind each row, and opens it in one click. Sort by it to group rows by what controls them, or type a controller's name into the filter to see only what it runs.

  • Change a port forward's ports, and take back a local port another app grabbed

    Each rule on the Port forwards page has an edit button. When a forward fails because its local port is already in use, the dialog names the process holding it and offers a free port in one click, or stops that process for you after a confirmation.

Improved

  • Logs for a workload with one pod drop the pod picker and the pod name on every line

    The pod is named once in the logs toolbar, as a link to it. Lines still show their container when the pod has more than one.

  • Back steps through the Settings sections you visited

    Each section you open in Settings is now a step in the history, so ‹ returns to the section you were on instead of leaving Settings. × and Escape still close Settings in one go.

Fixed

  • Forward a Service port that is offered over both UDP and TCP

    Services such as kube-dns list port 53 twice, once for UDP and once for TCP. Forwarding it used to fail with "port 53 is UDP, and only TCP can be forwarded"; it now uses the TCP side.

  • A workload's logs follow a rollout to its new pods

    The logs panel of a Deployment, StatefulSet or DaemonSet kept reading the pods it had found when it opened. After a restart, the new pods' lines never showed up until you clicked Reconnect, and with a Recreate rollout the stream ended the moment the old pods were gone. It now picks the new pods up as they start.

0.26.0

New

  • Send feedback from the status bar

    The speech bubble at the bottom right opens a new issue on GitHub with your Sternpost version filled in. The app header also has a gear for Settings now, after the back and forward arrows, and the status bar shows Console, Feedback and Settings as icons, named on hover.

  • Sternpost runs on Intel Macs

    Every release now has a macOS build for Intel next to the Apple Silicon one: pick the file with x64 in its name. It keeps itself up to date like the Apple Silicon build.

    Docs
  • Export and import the CronJobs and Jobs you follow

    Export… and Import… at the bottom of the Subscriptions panel's Active tab save them to a file and follow them again from it, on this computer or another. Removing a cluster drops what you follow on it, so export first if you mean to add the cluster back.

    Docs
  • Download a workload's full log, or open it in its own window

    The logs on a Deployment, StatefulSet, DaemonSet, ReplicaSet or Job now have ⇩ and Open in window, like a pod's. The download holds every pod's full log in one file, each line tagged with its pod.

    Docs

Improved

  • Read the terms to the end, then confirm, to agree

    I agree turns on once you've scrolled to the end of the terms, and asks once more before Sternpost opens: which version you're agreeing to, and whether version info is sent. Decline has the focus to begin with, and pressing Enter never agrees by itself.

    Docs
  • Choose about version info when you agree to the terms

    The terms screen now says what the daily update check sends, and has the Send version info switch next to I agree. It's off until you turn it on. Leave it off there and no install id is made, and any from an earlier version is deleted; nothing is sent before you agree. The switch was called Send anonymous version info: the install id is pseudonymous, not anonymous, and Settings → Updates now says so too. Version 2 of the terms adds this choice, so Sternpost asks you to agree once more.

    Docs
  • Updates are checked again right before they install

    If a downloaded update changed after it was checked, Sternpost throws it away and downloads it again. That check also runs before an idle restart or Install now closes the app: if it fails, the version you have keeps running. The version an update replaces stays on your Mac, hidden next to the new one, until the new one has run for a minute, so a version that won't open can be put back by hand (the docs say how). Nothing outside the app can change where updates come from.

    Docs
  • Search works for accounts limited to a few namespaces

    If your account may only read some namespaces, pick them in Scope in the header. Sternpost then watches up to 8 of those namespaces one at a time and searches them, instead of finding nothing because it can't read the whole cluster. Lists of those namespaces now update live too. Pick more than 8 and search covers the first 8 by name; the strip under the header names the ones left out. Settings → Search says which kinds are searched this way, and any namespace you picked that your account can't read.

    Docs

Fixed

  • Removing a cluster asks first, and can keep a pasted kubeconfig

    "remove…" on the Clusters page and "Remove…" in Settings now open a confirmation that names the cluster and says what goes and what stays. If you pasted the cluster's kubeconfig into Sternpost, the dialog warns that removing deletes that file and keeps it unless you untick "Keep the file".

  • Esc no longer closes a confirmation while it is working

    Pressing Esc during a delete, scale, save or cluster remove closed the dialog, but the action still ran, and if it failed you never saw why. The dialog now stays up until the answer comes back. After removing your last cluster with "Keep the file" ticked, the Clusters page and Settings now show where the kubeconfig was kept, instead of covering or skipping that line.

  • On Windows and Linux, Settings → Updates shows where to get new versions

    Its "Download page" button opened a page that only works from the link in your invite email. Sternpost now tells you to use that link, and "Request a new link" gets you a fresh one if the email is gone or the link has expired.

    Docs
  • Latest Chromium security fixes

  • The Chromium credits and Electron licence are back in the macOS app

    The macOS download was missing both files, so Settings → Licences had no buttons to open them. They now ship with the app on macOS too, inside Sternpost.app, as they already did next to the program on Windows and Linux.

  • Lists say plainly when your account can't read the whole cluster

    With an account limited to some namespaces and nothing picked in Scope, a list page showed the raw HTTP response as its error. It now shows the cluster's own reason, and that you can pick the namespaces you may read in Scope in the header.

    Docs
  • Previous on a workload's log works for pods with several containers

    On a Deployment, StatefulSet or other workload whose pods run more than one container, Previous showed an error for each pod instead of its log. It now shows the previous instance of each container that restarted, tagged with the container's name.

    Docs
  • Small fixes from the beta review

    Removing a cluster whose kubeconfig you pasted keeps the file unless you untick "Keep the file". An account that can't list namespaces starts with its kubeconfig context's namespace in Scope, so its first page shows what it can read; the picker's hint is a heading now, not a row with a checkbox. A proxy's error page is shown without its headers and cut short. The Settings control is a gear. A Secret with no values can be edited again, and the manifest note says the kubectl apply copy is hidden too. "Previous" logs with a container named no longer report a not-found for pods where it never restarted, and "Copy pretty JSON" gives the same text on every platform. Links that leave the app open only for web and mail addresses.

  • Choose your namespaces when your account can't list them

    With an account limited to some namespaces, the Scope picker offered nothing but All and showed a raw error. It now offers the namespace your kubeconfig context names, and a field beside it adds any other namespace by name.

    Docs
  • Secret values stay hidden on Secrets created with kubectl apply

    kubectl apply keeps a copy of a Secret's values in its kubectl.kubernetes.io/last-applied-configuration annotation, and Sternpost showed that copy in full: in the Annotations section, in the manifest, in the console and to AI agents over MCP. The copy's values are now hidden everywhere the Secret's own values are.

  • Removing a cluster stops its notifications

    CronJobs you followed on it kept posting notifications until you quit. Now removing a cluster drops the CronJobs you follow on it and the Jobs being watched on it, without a notification for any of them. Finished notifications stay in the Done tab.

    Docs
  • CPU and memory bars measure a pod against the containers running at the time

    While a pod's init containers ran, its usage was compared with the app container's limits instead of their own, so a 22Gi init step could show as 800% of a 2Gi limit. The limit line on a pod's charts now steps as each container takes over, and the CPU and Memory columns in the pods list use the same limits.

  • Sternpost stops retrying lists your account isn't allowed to make

    When your account isn't allowed to list a kind across the cluster, Sternpost now asks once and stops, instead of asking again every thirty seconds and filling the cluster's audit log. Search covers everything else. The search box says how many kinds it couldn't read, and Settings → Search names them, with Try again for when your access changes. Search no longer watches Secrets and ConfigMaps by default, also if you had saved your own selection in Settings → Search; tick them there again if you want them.

    Docs

0.25.0

New

  • Sternpost asks you to agree to its terms before it opens

    On first launch, and again whenever the terms change, the app shows them in full with I agree and Decline; Decline quits. Read them again any time from Settings → Terms. The macOS disk image and the Windows installer show them too.

0.24.0

New

  • Sternpost updates itself on macOS

    New versions download in the background and install when you quit, or while Sternpost sits idle in the menu bar. Prefer to choose? Turn automatic installs off in Settings → Updates: a badge appears next to Settings when a new version is out, and you can install now, on quit, or skip it. Click the version number in the status bar to see what's new. Sternpost needs to be in your Applications folder for this; if you run it from the disk image or from Downloads, drag it into Applications with Finder first.

    Docs
  • Read JSON logs as logs: time, level and message, with the rest one click away

    The logs panel recognises the JSON that pino, zap, slog, logrus, Spring (ECS), structlog, nginx and a dozen other loggers write, and shows each line as time, level and message, coloured by level. Click a line to unfold it, or open the inspector beside the log for the whole object as a tree or pretty JSON. Show only warnings and errors, also when searching the entire log; turn any field into a column; teach it your own format in Settings → Logs. Lines that aren't JSON (a banner, a stack trace) stay where they are, and Raw is one click away.

    Docs
  • See the open-source software Sternpost is built on

    Settings → Licences, under the section list, shows every package the app ships with its licence and full notice text, and opens the Chromium and Electron credits.

Improved

  • The update check sends anonymous version info, and you can turn it off

    Once a day, the update check also sends a random install id, the Sternpost version and your platform (for example darwin-arm64), so we can see which versions are still in use. Nothing about you or your clusters. It's on by default. Turn off Send anonymous version info in Settings → Updates and the id is deleted from your machine; turn it on again and you get a new one.

    Docs

Fixed

  • Sternpost no longer downloads spellcheck dictionaries from Google

    On Windows and Linux, the built-in spellchecker fetched its dictionaries from Google's servers, the only connection the app made to anything but your clusters and Prometheus. Spellchecking is now off in every window.

  • Ctrl-click keeps only one namespace or pod on Windows and Linux

    In the namespace Scope, the namespace filter and the Pods picker in the logs, Ctrl-click, Ctrl-Enter and Ctrl-Space now keep only that row, as ⌘ does on a Mac. Before, they toggled the row like a plain click.

    Docs
  • Scrolled-up logs stay where you are reading

    On a busy pod, once the logs panel held its 5,000 lines, the line you had scrolled up to slid out of view as new lines arrived. It now stays put, with wrapping on or off, while you search or inspect a line, and when you toggle Wrap.

0.23.0

New

  • Any window can show any cluster and namespace scope

    Each window keeps its own scope and cluster, so narrowing one window no longer changes the others. ⌘-click a link to open it in a new window.

    Docs

Improved

  • A home button at the start of the header

  • The console is off until you turn it on

    Switch it on in Settings → App.

    Docs

Fixed

  • Lists on very large clusters show every resource

    On clusters with more than 5,000 pods, the list, search and notifications only saw the first 5,000.

0.22.0

New

  • Keep getting Job notifications with the window closed

    Sternpost stays in the menu bar or tray and keeps watching. It can also open at login.

    Docs
  • Open a cluster in its own window

    ⌘-click a cluster in the palette or a picker to open it in a window of its own.

    Docs

Improved

  • Drag the window by its header on macOS

0.21.0

New

  • Select several rows and act on them together

    Multi-select in resource lists and in the command palette, with bulk delete.

  • Favourites

    Pin lists and resources to the sidebar.

    Docs
  • Let an AI agent read your clusters over MCP

    Turn it on in Settings › Agents. Agents can read, and propose actions that you confirm or dismiss in the app.

    Docs
  • A console that shows what Sternpost does to the cluster

    Every action, the API requests behind it, and the kubectl command that would do the same.

    Docs
  • Follow a CronJob to be notified of every run

Improved

  • A new look

    A floating panel, accent-tinted surfaces, tabs on the detail pane and full-width logs and terminal. Reduce motion is respected everywhere.

0.20.0

Fixed

  • Switching list pages is instant on a slow cluster

0.19.0

Improved

  • Cancel indexing on a large cluster

    The indexing dialog has a way out, and a link to the search settings.

0.18.0

Improved

  • Choose the table density

    With optional row stripes and row hover, in Settings → Appearance.

Fixed

  • Clusters that sign in through a plugin work when Sternpost is opened from Finder

    Kubeconfigs that run kubelogin, aws or gke-gcloud-auth-plugin no longer fail outside a terminal.

  • A missing sign-in plugin is named in the error

0.17.0

New

  • Edit a manifest and save it

    Review the diff before anything is applied.

  • A home page for each cluster

    Counts, and what needs your attention.

  • Get notified when a Job finishes

    With a notification center to catch up.

    Docs
  • Search a log

    In the lines already loaded or across the whole log.

Improved

  • Resource lists update live as the cluster changes

  • Sort a list by clicking a column heading

    The sort is remembered per table.

0.11.0

Maintenance and fixes.

0.10.0

Improved

  • Sternpost orange is the default accent

    Factory reset in Settings → Appearance brings it back if you changed it.

  • Focus rings follow the accent colour

Fixed

  • No blue flash at launch when your system accent is another colour

  • A crashed container reads Error until Kubernetes reports CrashLoopBackOff

0.8.0

New

  • Follow your system's accent colour, or pick your own

  • Keyboard shortcuts in Settings

    ⌘ Cmd + N opens the namespace scope.

    Docs

Improved

  • Resource lists show every row

    Lists read from a live cache, scroll smoothly, and no longer stop at 500.

Fixed

  • The table header stays above the rows when scrolling

  • The window is titled Sternpost

0.7.0

New

  • Open a shell in a container

    Typing echoes instantly, even on a slow connection.

Improved

  • Settings and the other side pages close like a drawer

    Click × or press Escape to go back.

  • One picker for namespaces and pods

    The namespace scope, the page filter and the pod picker are one multi-select.

  • A page opened from the command palette takes keyboard focus

0.6.0

New

  • Run a CronJob now

    From its page or the command palette, after one confirmation.

  • See a CronJob's Jobs on its page, newest run first

  • Read the logs of a container's previous run

    Picked automatically when the container is crash-looping.

  • Stats for nerds

    Every process Sternpost runs, with its CPU and memory, live.

Improved

  • Detail pages say how the resource is doing

    A one-word state at the top, and conditions show their status and reason.

  • Pod and revision tables follow a rollout live

0.5.0

New

  • Forward a local port to a pod

  • Show the logs and terminal panel full screen

Improved

  • ConfigMap and Secret pages open on their manifest

  • Ingress pages show their hosts as links, at the top

0.4.0

Maintenance and fixes.

0.3.0

New

  • Switch cluster from the command palette or the status bar

  • Give each cluster its own colour

  • Browse every kind your cluster serves, custom resources included

  • CPU and memory usage in tables and charts

    From Prometheus or the Metrics API.

    Docs
  • Search the navigation menu, and choose what the header search covers

Improved

  • One layout for every page, with full-width tables

0.1.0

New

  • The first build of Sternpost

    Browse clusters, workloads, logs and configs from the kubeconfig you already have.